Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
On Oct 24, 10:23*pm, Tom Horne wrote:
I have read that the presently available 300 ohm ladder line is unsuitable to use at some amateur radio frequencies because of it's construction and the losses caused by skin effect in the copper coated steel construction. *I have been using a Terminated Folded Dipole in a flat top configuration as my HF antenna at home. *Having recently acquired an Icom AH-4 Antenna Coupler I am considering converting it to a simple folded dipole, *feeding it with 300 ohm ladder line to match it's nominal impedance from the coupler. *I know your sure that there is a question in here someplace so is there better quality 300 ohm window line available that is entirely stranded copper in it's construction? -- Tom Horne, W3TDH For me, it's not the wire that is a problem. It's rain.. When dry, most all the 300 ohm lines are going to be fairly low loss. Even with the cheap wire. But get the line good and wet, and it all goes out the window. For this reason, I would prefer a windowed ladder type line for this, rather than 300 ohm. It's less effected by rain. Most ladder type lines will be in the 450 ohm range, but that would vary with spacing of the conductors. But that is not critical in your case.. 300, 450, 600 ohms, doesn't really matter too much.. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
ladder line?? | Antenna | |||
Using Twin Lead or Ladder Line for your Antenna's Feed-in-Line ? - Then 'consider' a Pair of Vintage Style TV Antenna Clips . . . | Shortwave | |||
Using 450ohm ladder line | Antenna | |||
Feed Line Length - Ladder Line | Antenna |