Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 7th 04, 03:16 PM
Fred
 
Posts: n/a
Default Receive antenna question..

I am wondering if this will work…

This is for receive only…. I have a mag mount antenna that I have
trimmed to around 19" for around 155 MHz (1/4 wave), I was wondering
about adding a 6.5" antenna next to it for UHF.

The antenna is screwed to the mag base on a 1/4 20 stud. My idea is to
take a 2 inch piece of flat steel and drill a 1/4 inch hole to mount
under the antenna. Then I will attach my 6.5" antenna..

|
| -- 19"
|
| |
| | -- 6.5"
|_|
|
|
|
| -- Coax
|
|


My other question has to do with grounding. I used my VOM to check and
see it the outer braid of the coax goes anywhere. I thought it might
ground to the magnet but this is not the case. The center of the coax
goes to the 1/4" stud on the mag mount but the outer braid seems to
not go anywhere.. is this right?

Thanks!

Fred
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Mobile Ant L match ? Henry Kolesnik Antenna 14 January 20th 04 04:08 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 04:47 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017