Home |
Search |
Today's Posts |
#1
|
|||
|
|||
1.2Ghz Antenna Construction Design required.
Hi All,
I am on the look for a design for a 1.2Ghz antenna. Any design will be of interest, but I am after construction of a high gain panel type. -- Kevin, ZL1UDD |
#2
|
|||
|
|||
need polarization, gain and amount of backlobes, portable?
one panel type is 4 helical beams, comes out almost on 50 ohms, high gain a flat type is stripline in/on a PCB, elements or slots are fed to center point Another type easy to build is using a gallon paint can with feed about 1/4 wave from the back(not panel type) "Kevin & Natalia Mitchell" wrote in message ... Hi All, I am on the look for a design for a 1.2Ghz antenna. Any design will be of interest, but I am after construction of a high gain panel type. -- Kevin, ZL1UDD |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
EH Antenna Revisited | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna |