LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old April 28th 04, 03:49 AM
Richard Harrison
 
Posts: n/a
Default

Bill, K6TAJ wrote:
"Thinking about getting through walls with ladder line."

I`ve brought open wire lines through walls by Pyrex bowl insulators
mounted on a sheet of plywood framed into the wall as if it were a
window. The plywood between the conductors seemed not to hurt. Glass or
Plexiglas would be better and might obviate the bowl insulators.

You also could cut the plywood, Plexiglas, or glass sheet to fit under a
window sash. Then, just lower the sash on the sheet.

You want innocuous materials between the wires and surrounding the line
by at least several times the spacing between the wires.

Best regards, Richard Harrison, KB5WZI

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
G5RV.... feed TonyWard Antenna 7 April 20th 04 06:51 PM
Horizintal loop with two feed points? T.E.O Antenna 5 April 9th 04 12:16 AM
double double (bi)quad - feed impedance? Jeppe Antenna 0 March 23rd 04 10:08 PM
Methods for ladder line feed on rotatable antenna? KS7J Antenna 11 November 18th 03 01:45 AM
70 ohm dipole to 50 ohm feed line question Tom Sedlack Antenna 10 October 6th 03 01:24 AM


All times are GMT +1. The time now is 08:18 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017