Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Tom's comment below -
For an example of the VSWR bandwidth achievable in an HF design, check the antenna described at this link http://www.tcibr.com/PDFs/613tfwebs.pdf. Nominal input VSWR is 2:1 from 2-30MHz . No input tuner is used. Good VSWR bandwidth in an antenna is not limited to VHF and above. RF Visit http://rfry.org for FM broadcast RF system papers. ______________________ "Tom Bruhns" wrote Just because one person wants to use a tuner, and retune after any QSY greater than 20kHz doesn't mean another who wants to use a broadband system should be discouraged from doing so. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Adding lengths to bare wire antenna? | Antenna | |||
Excessive RF Exposure from Long Wire? | Antenna | |||
randon wire newbie question | Antenna | |||
Open Wire Feeder Switching Ideas ? | Antenna | |||
Feedpoint impedence / wire diameter | Antenna |