LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old August 10th 11, 12:15 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Aug 2011
Posts: 6
Default Starting out. . .

For some reason, the photobucket image of the new configuration
doesn't seem to appear. Try this?

http://i258.photobucket.com/albums/h...g?t=1312974756

Rees

On Aug 10, 5:39*am, DrYattz wrote:
THANKS, everyone, for the very thoughtful and thorough responses!
________________________________

John KD5YI wrote:
Check for a slide switch on the back that switches from internal to external antenna.


Would that be the ATT 0dB - 20dB switch? *They show it in a figure,
but don't say what it's for. *I'll try it.

Sal wrote:
Feedback to me would be nice. *A Nobel Prize would be a bonus.


Your detailed suggestions of the antenna connections and
troubleshooting are quite helpful. *I will return to them if the new
configuration doesn't work.

Jim Higgins wrote:

* Why aren't you connecting the antenna to the Lo-Z SO-239 connector
instead of the Hi-Z Motorola type connector? *(Other than the manual
telling you to use the Hi-Z.)

Right. *Apparently, Radio Shack improved the DX-394, but kept the
crappy manual. *Getting the antenna higher would help, I'm sure, but
for now I'm stuck with what I've got.

Richard Clark KB7QHC wrote:
If you read this last paragraph closely, it gives a clue to a project


you and your son could engage in: constructing a tuner from parts.

I appreciate the suggestions. *But I'm going to take the easy way for
now.
_________________________________

These have led me to try another configuration; what I'm imagining is
athttp://i258.photobucket.com/albums/hh242/winwinsit/antenna2-1.jpg

The lightning arrestor I'm considering is athttp://ba-electronics.com/a28..htm.

I'm wondering:

1) if this new configuration makes sense.

2) if I should use coaxial cable at A (between the tuner and the
lightning arrestor) since the connectors are SO-239 and PL-259? *Or
should I just run more of the insulated wire?

3) about coaxial cable at B (from the arrestor to the antenna wire)?

4) if this antenna tuner would be adequate? *MFJ-16010 athttp://www.universal-radio.com/catalog/preamps/1329.html. *If not, any
other recommendations?

Thanks again!

Rees


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FCC starting out against "Non-commercial" ads Radioman390 Shortwave 6 August 20th 11 07:20 PM
AKC is starting Feb. right! HAHAHA moparholic at hotmail dot com is a sissy CB 2 February 6th 06 07:43 PM
Starting again Reg Edwards Antenna 13 May 21st 05 04:51 AM
This weekend starting around 23.30 on 19 mb and 48 mb World DX Anounce group Shortwave 0 May 21st 04 12:47 PM
Just starting.... Neil Scanner 2 January 19th 04 04:46 PM


All times are GMT +1. The time now is 09:21 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017