Rob wrote:

No. There are two sides, one of them for the high frequency and the
other for the low frequency. The filter response is such that it passes
on one frequency and notches on the other.

Ok thanks. Note that they are tunable anywhere in the 136-17? range.

Assuming the pass side is set to pass 145.600 (the input) and the notch
side is set to notch out 145.000 (the output) and they are connected in
series, would that work?

Geoff.


--
Geoffrey S. Mendelson N3OWJ/4X1GM
Making your enemy reliant on software you support is the best revenge.