Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Jim Kelley wrote:
Cecil Moore wrote: I can't explain how but I certainly can explain why. I know why - because it's the only way you can understand. It just doesn't happen to be true - as evidenced by the lack of any physical explanation for it. The 'why' is conservation of energy. If there are only two directions available and energy was traveling in one direction and now it isn't, it's a no-brainer to realize that it must have changed directions. I'm sorry that you don't believe in the conservation of energy theorem, Jim. Do you boss know that? So far you have failed every challenge to disprove the why. Wonder why? -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#2
![]() |
|||
|
|||
![]() "Cecil Moore" wrote in message ... The 'why' is conservation of energy. If there are only two directions available and energy was traveling in one direction and now it isn't, it's a no-brainer to realize that it must have changed directions. Cecil, I think a more convincing argument is that I can take a slotted line and directly measure a standing wave on it. A wave traveling in one direction can not do that. Or am I cunfusing things? Tam/WB2TT |
#3
![]() |
|||
|
|||
![]() Tam/WB2TT wrote: "Cecil Moore" wrote in message ... The 'why' is conservation of energy. If there are only two directions available and energy was traveling in one direction and now it isn't, it's a no-brainer to realize that it must have changed directions. Cecil, I think a more convincing argument is that I can take a slotted line and directly measure a standing wave on it. A wave traveling in one direction can not do that. Or am I cunfusing things? Tam/WB2TT No. That's right. But the point is - how much energy is actually moving past the probe? Cecil seems to believe that a standing wave is more than a superposition of voltages. It would be easy to mistake that as a superposition of energies. But one can only superpose vector quantities. 73, Jim AC6XG |
#4
![]() |
|||
|
|||
![]()
whoa
system is: source - line - load If there are impedance mismatches, in the steady state (ie 3 microseconds after key down); There will be more energy in the transmission line and the source than there would be if all the impedances were matched. This is necessary to satisfy the boundary conditions imposed on Maxwell's Equations at each end of the transmission line. The losses are the rent you pay for storing the energy; See bazookas for a good example. To the radiated energy moving past the probe one must add the losses. That's why I prefer antennas with no reflections. Reflect on that. If you really want a book Paul Dirac's "Quantum Mechanics" is sweet. Or Hawking's "The Large Scale Structure of Space-Time." My cat, Hiram P Maxim (Max for short, he likes sleeping on the S-Line I've had since '63), just walked over the keys and approves. 73 H. NQ5H "Jim Kelley" wrote in message ... Tam/WB2TT wrote: "Cecil Moore" wrote in message ... The 'why' is conservation of energy. If there are only two directions available and energy was traveling in one direction and now it isn't, it's a no-brainer to realize that it must have changed directions. Cecil, I think a more convincing argument is that I can take a slotted line and directly measure a standing wave on it. A wave traveling in one direction can not do that. Or am I cunfusing things? Tam/WB2TT No. That's right. But the point is - how much energy is actually moving past the probe? Cecil seems to believe that a standing wave is more than a superposition of voltages. It would be easy to mistake that as a superposition of energies. But one can only superpose vector quantities. 73, Jim AC6XG |
#5
![]() |
|||
|
|||
![]()
H. Adam Stevens wrote:
That's why I prefer antennas with no reflections. Dipoles are reflected-wave antennas. You don't like them? -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#6
![]() |
|||
|
|||
![]()
Jim Kelley wrote:
Cecil seems to believe that a standing wave is more than a superposition of voltages. Exactly, it is also a superposition of currents in phase with the voltages. V*I*cos(0)=power Everyone, including you, gets into trouble by completely ignoring the superposition of currents. When are you (and your boss) going to stop violating the laws of physics? -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#7
![]() |
|||
|
|||
![]()
Tam/WB2TT wrote:
"Cecil Moore" wrote: The 'why' is conservation of energy. If there are only two directions available and energy was traveling in one direction and now it isn't, it's a no-brainer to realize that it must have changed directions. Cecil, I think a more convincing argument is that I can take a slotted line and directly measure a standing wave on it. A wave traveling in one direction can not do that. Yes, that is the basis of my earlier challenge. Nobody has been able to provide a standing wave not composed of a forward-traveling wave superposed with a rearward-traveling wave. I have offered anyone and everyone $100 who can accomplish that in a single-source/single transmission line/single-load system. So far, no takers. One wonders why, considering all the gurus on this newsgroup. What I get instead are obfuscations of how waves can exist without energy. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
#8
![]() |
|||
|
|||
![]() Cecil Moore wrote: I'm sorry that you don't believe in the conservation of energy theorem, Jim. Do you boss know that? Thankfully you're the only one who deludes himself with this notion, Cecil. Energy moves from source to load. It doesn't bounce back and forth on it's way. That's what my "boss" believes - as I have explained to you previously, in great detail. 73, Jim AC6XG |
#9
![]() |
|||
|
|||
![]()
Jim Kelley wrote:
Energy moves from source to load. It doesn't bounce back and forth on it's way. Shirley, you jest. That means you have never seen your reflection in a mirror. (If I were you, I wouldn't be able to stand looking myself in the eye either.) -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna |