| Home |
| Search |
| Today's Posts |
|
#3
March 7th 12, 09:42 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Radio Station Project Inquiry
On 3/7/2012 3:10 PM, amdx wrote:
On 3/7/2012 8:56 AM, samersaed wrote: Hi Engineers, I'm Starting a new FM Station Project in BENGHAZI - LIBYA which is 60km2 in area, i was advised to use a transmitting system of a 600w Transmitter attached to 4 double dipole antenna (http://www.labelitaly.com/website/akk2.html) as my tower specs are : tower angle 4 leg (leg size = 10 x 10), parameter at 96 m height = 2.5m x 2.5m. attached a picture of my tower. i want to get an omni-directional coverage as my tower is located in the center of the city and I've been told that unless a panel antenna the tower will make a shadow or something like that to the broadcast signal. i want to know if i'm really forced to use a panel antenna in my system, why i can't use a high power regular dipole antenna. and please advice if the transmitter power i'm using will be enough to cover the 60km2 area. hope to find help here. Thanks in advance. Why are looking at a flat panel directional antenna when you want a omnidirectional antenna? Mikek http://www.kathrein.pl/down/as_fmband.pdf |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wanted Station master for Repeater project | Swap | |||
| Setting up a radio station - Novice inquiry | Broadcasting | |||
| Setting up a radio station - Novice inquiry | Broadcasting | |||
| Setting up a radio station - Novice inquiry | Broadcasting | |||
| Setting up a radio station - Novice inquiry | Broadcasting | |||
Threaded Mode
