Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "tom" wrote in message . .. On 2/17/2013 7:51 PM, tom wrote: My calculation, based on a database of 100+ EME antennas predicts 13.6 dBi maximum reasonable gain. So that sounds about right. tom K0TAR Here is a link to a table of a lot of high performance yagis. http://www.sm2cew.com/gt.htm tom K0TAR Thank you all for your thoughtful comments. I like the downspout idea. (I was going to coat the wood boom with good epoxy paint, but, considering also the weight issue, maybe I should go with the downspout. It's going on a chimney mount, not a tower, making maintenance a bit simpler.) I saw the T-match but never intended to try it. I did get my gamma match to a 1.2:1 VSWR so, now I'm undecided. I used to use YAGICAD running under a BASIC interpreter, I think, but a lo-o-ong time ago. I will have a fresh look at it. I thought after the first four or five directors were in place, their spacing wouldn't be affected by adding more directors. Thanks for the heads-up that it matters. "Sal" |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
My latest homebrew project.... | Homebrew | |||
Wanted: Homebrew or Vintage HF Linear Project | Swap | |||
Homebrew RX restoration project | Boatanchors | |||
6 Meter Homebrew Project | Homebrew | |||
Help an old Ten-Tec tranceiver argonaut II in a homebrew transverter project | Homebrew |