Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
At Sun, 25 Aug 2013 13:45:00 -0600, Irv Finkleman rearranged some
electrons to write: I am running a random wire antenna. The line runs from the back of my tuner tand through a metal window frame about two feet away from the rear of the tuner. I feed it through the window using a plastic tube through a small hole drilled through the window frame. Once outside, the wire runs a short distance to a nearby tree. I can run about fifteen feet to the tree so it's not much better than a horizontal whip antenna. I also wonder what the effect is if I lengthen the antenna somewhat and drop the free end through the tree to near ground level? My question is what effect, i.e. losses will I incur (just a rough estimate) by going this way? I am on the second floor of a senior's residence and it appears that this is the best I will be able to manage. I run 5W QRP all band CW & SSB. Inside I use a tunable counterpoise to avoid RF burns etc. I've been hamming for over fifty years and don't want to quit. A little something is better than nothing!! Any opinions or ideas on the matter are welcomed. Thanks Irv VE6BP I guess I would say this: if that is all you will be able to put up, then you should try it. I'm sure it will work, maybe not so well on the lower bands. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Proximity effect in two wire open TL | Antenna | |||
Open wire feeders and proximity to other metal .... | Antenna | |||
effect of metal pipe supporting a vertical cage antenna | Antenna | |||
Window Frame as a Ground?? | Shortwave | |||
tuning a window frame | Antenna |