LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Old November 19th 13, 03:55 AM
Senior Member
 
First recorded activity by RadioBanter: Jan 2011
Posts: 390
Default

I don't think he gets it - if there is noise in his neighborhood - why blame it on the antenna?

The purpose of the YAGI antenna is to improve in one direction while causing rejection in another direction.

If noise is your problem - MOVE!

No one said you had to put up a antenna there.

I had power line noise, actually BBOP, which I solved after some discussion with the electric company, followed by a complaint to the PUC, followed by a complaint to the FCC.

In the end, it cost me $500.00 - because the electric company made me replace my service entrance - bad cable jacket.

The bottom line is - if you are intelligent enough to find the source of the noise and can eliminate that source, you shouldn't have noise anymore.

Most vertical antenna's are to DC ground.

Because they do not provide any rejection, they cannot physically have any gain. Although they might have characteristics like a antenna that does have gain.

I have proven a dozen times that I will talk just as far with a simple vertical antenna as many people will with a beam antenna. It is more about the location of the antenna then it is of the actual power level or the amount of gain of the antenna. I just happen to be in a better situation then most people when it comes to antenna's and two way communications.
__________________
No Kings, no queens, no jacks, no long talking washer women...
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Dualband 2m/70cm yagi and 6m yagi Andy in NJ Antenna 0 July 1st 04 05:38 AM
FS: Dualband 2m/70cm yagi and 6m yagi Andy in NJ Antenna 0 July 1st 04 05:38 AM
FS: Dualband 2m/70cm yagi and 6m yagi Andy in NJ Swap 0 July 1st 04 05:38 AM
WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter Carl R. Stevenson Homebrew 0 January 21st 04 04:20 AM
Automatic RF noise cancellation and audio noise measurement Dave Shrader Homebrew 35 August 11th 03 01:07 AM


All times are GMT +1. The time now is 07:50 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017