LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #40   Report Post  
Old January 25th 14, 01:32 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default Relationship Between Antenna Efficiency and Received Signal Strength

On 1/24/2014 5:10 PM, wrote:
On Friday, January 24, 2014 7:21:42 AM UTC-6, Jerry Stuckle wrote:


Low antenna efficiency affects not only the received signal, but the

received noise.


Of course. I've already said that several times. But they effect
both equally, so the s/n ratio will stay the same assuming the
overall level is overriding the recv internal noise.


And my point was - the overall level may NOT be overriding the
receiver's internal noise. And to be perfectly accurate, ANY lowering
of the external signal decreases the S/N ratio because the internally
generated noise does not change. But I also understand what you're
getting at.




And yes, many inexpensive "modern" receivers suffer from poor front

ends.


Most will be good enough not to see the problems you are
mentioning though. Like I say, you'll have to see almost
nothing at all from the antenna system to have that problem.

Even my dinky mobile antennas greatly swamp the internal
noise, even on 10m, when using my Icom 706mk2g.

Heck, I've never had or used an antenna system that was
bad enough to see the problem you are mentioning.


Yes, most current ham rigs are that good (at least I don't know of any
which aren't). But a lot of less expensive general coverage ("SWL")
receivers aren't.

--
==================
Remove the "x" from my email address
Jerry Stuckle

==================


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Increasing Cable TV signal strength amdx Antenna 216 April 3rd 12 03:48 PM
What's Your Signal Strength? Chuck Shortwave 4 October 6th 04 10:51 PM
Signal Strength Suggestions Nickolas Antenna 4 August 30th 04 04:53 PM
APRS and signal strength.. Joel Homebrew 0 January 4th 04 11:13 PM
APRS and signal strength.. Joel Homebrew 0 January 4th 04 11:13 PM


All times are GMT +1. The time now is 02:24 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017