LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #36   Report Post  
Old January 25th 14, 11:08 PM
Senior Member
 
First recorded activity by RadioBanter: Jan 2011
Posts: 390
Default

Quote:
Originally Posted by Jeff Liebermann[_2_] View Post
On Fri, 24 Jan 2014 19:44:38 -0800 (PST), W5DXP
wrote:

On Friday, January 24, 2014 5:16:15 PM UTC-6, Jeff Liebermann wrote:
Mythbusters did a test of urinating on an electrified 3rd rail.
It didn't work.


I got a severe static electricity shock in Odessa, TX one time
while urinating into a hotel john. I saw the arc between my stream
and the water in the john. The hotel had wool carpets and the
humidity was very low.


Ouch. I feel your pain. Wikipedia claims 3 million volts/meter (or
about 75,000 volts/inch) which seems a bit high:
http://en.wikipedia.org/wiki/Dielect...field_strength
I've always used 10,000 volts/inch but I don't recall the conditions
for which that's accurate. In any case, you had quite a (static) high
voltage buildup, which could jump the broken parts of the urine flow.

1000 watts into a ground mounted HF vertical? Is that a good idea? It
might be too close to the operator to be within accepted RF exposure
(MPE) limits. Checking:
http://transition.fcc.gov/Bureaus/En...t65/oet65b.pdf
See table 4a on Pg 23. For 1000 watts the minimum distances for a
typical 0dBi gain antenna is:
Band Controlled Uncontrolled (meters)
160m 0.5 0.7
80m 0.6 1.3
40m 1.1 2.5
20m 2.2 4.8
15m 3.2 7.2
10m 4.5 10.
So, if he's operating on 20 meters, a ground mounted antenna with no
gain and 1000 watts can't be any closer than about 14 ft from the
operator. Maybe with a big yard and if you don't care about cooking
the dog or the neighbors.

In order to put the voltage node of the vertical near where the dogs
urine stream can reach, it would need to be fairly close to the
ground. That leaves very little room for the ground radials, any
possible control box, or a balun. Seem an odd vertical antenna with
the loading coil at ground level. Maybe for 160 meters or a mono band
antenna.
I would laugh if any of these CB'rs ever had the FCC knock at their door and do a station inspection. Without doing a field survey, their butt would be fried, especially if on the right frequency such as 60 meters....
All it would take is for one neighbor to complain and that would be it!

This kind of stuff gives all amateurs a black eye when it comes to proper operating procedures.
There is a lot of idiots out there that thinks that if they HAVE a 1000 watt amplifier that they automatically HAVE to turn it on in order for everyone to hear them!

Too bad there isn't more O&O's out there that would be willing to get involved. I would like to see a lot of these big time operators cited for their actions.. S T U P I D!
__________________
No Kings, no queens, no jacks, no long talking washer women...
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CENSORSHIP MADE EASY!!! N9OGL Policy 2 January 13th 06 07:56 PM
CENSORSHIP MADE EASY!!! N0VFP General 6 January 13th 06 07:56 PM
TOS'ing Wogie made easy Digital General 7 September 15th 05 01:32 PM


All times are GMT +1. The time now is 04:01 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017