Home |
Search |
Today's Posts |
#16
|
|||
|
|||
I have question about R L Mathematics
On Tue, 28 Jan 2014 15:44:38 -0600, amdx wrote:
It is a lot. But when I put it together 15 years ago, I seem to remember about 4000 ohms. No, I'm measuring shield end to end. Here's a picture, maybe that will give you a different opinion. http://s395.photobucket.com/user/Qma...40099.jpg.html The resistance from shield to shield should fairly close to zero. Same with center pin to center pin. If you're not getting near zero, you have an open somewhere in the circuit. My guess(tm) would be the crappy old PL-259 connectors and UG-175 reducers. Check your continuity. You will see in the picture I stabilized it and tapped the whole thing. Perhaps you meant "taped" as in wrapped with duct tape? The center hole is not big enough for RG-6/u. Peel off the RG-6/u outer jacket and it will probably fit. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|