Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old March 22nd 14, 03:41 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Mar 2014
Posts: 16
Default Discone and feedline grounding

On 03/21/2014 08:40 AM, Ralph Mowery wrote:

"Jon Danniken" wrote in message
...
Thanks Ralph, I'll try that this weekend and see what the results are (I
have scads of RG6).

Speaking of cable impedance, will I see much of a difference using 70
ohm cable on an 50 ohm antenna? Assuming less than 50 feed of distance,
does it really matter that much?


YOu will not see any differance using either the 50 or 70 ohm cable due to
impedance. You may see some due to the actual loss of the cable. For
example rg-58 (50 ohm) will have more loss than rg-6, but if you go to a
lower loss 50 ohm cable such as rg-8 then the cable loss will be less. For
50 feet and receiving only, I would use the rg-6 as you said you have
plenty of it.


Thanks Ralph, that will be my plan.

Jon

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discone, etc. Questions Robert11 Antenna 5 June 26th 07 07:29 PM
HF discone ????????????? Spock Antenna 5 April 15th 06 08:59 AM
Discone antenna? Brent Scanner 33 October 30th 04 06:06 PM
Antennas, 2.4 and discone Norman B Swap 0 November 23rd 03 02:54 AM
Discone ant on 144/440? Amigaman Antenna 8 October 2nd 03 10:57 PM


All times are GMT +1. The time now is 10:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017