Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]() "Tom W3TDH" wrote in message ... I am going to declare myself lost on this one so please be patient. I had though I had addressed these issues when I said I was using a DCI Dual Band Filter and Diplexer. Is the DCI combination filter and diplexer insufficient to protect the two radios from each other? DCI claimed it would be. The model number is DCI-146-444-DX-DB. The web sight were it is listed is http://www.dci.ca/?Section=Products&SubSection=Amateur. If I need to add Duplexers it is practical to do because the mobile ones available used are manageable money. If there is a real chance for damage in the event .of simultaneous transmission then I will need to add circulators and dummy loads to the output of both radios. That will end up being a little pricy. That DCI should be plenty to protect the two rigs. You may have a desense on the 440 receiver if it on a near 3 rd harmonic of the 144 transmiter. It won't be enough to cause any damage, just enough to block the 440 receiver. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Recomend Size of Aux Antenna for use with MFJ-1025/6 or ANC-4 | Antenna | |||
Flower Pot Antenna a Dual-Band (20m and 10m) 'portable' Antenna | Shortwave | |||
Inquiry: dual band hand held radios | Swap | |||
dual band radios that transmit frs channels | General | |||
dual band radios that transmit frs channels | Policy |