Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
On 2015-06-01, Tom wrote:
My question is about de-sulfating. I bought the one for $20.00 bucks that connects and blinks the red light while it is desulfating with an electronic pulse (reverse) and while I did this for about 2 months now on the batteries, one shows very very good response but one still only holds the 12v charge for a week then goes down to 10v. What I want to try is replacing the sulfuric acid. I think that could super Look at this link and notice on first page (2nd column, right) where it talks about dendrites and then later the part about reconditioning. The de-sulphanation can work but there is a point of damage where it will not. My guess (purely a guess) is that you will have to replace the battery showing 10v. You probably have too much damage in one cell with deposits on the positive plate and the above mentioned dendrites through the porus plate separators. This can all be rather confusing, but maybe anything is worth a try. ha Here is link: http://www1.electusdistribution.com....ded/nicads.pdf ....Edwin __________________________________________________ __________ "Once you have flown, you will walk the earth with your eyes turned skyward, for there you have been, there you long to return."-da Vinci http://www.kd5zlb.org |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Battery question | Moderated | |||
HT Battery question | Equipment | |||
IC-730 and IC-735 battery question | Equipment | |||
Battery question | Homebrew | |||
battery question | Scanner |