Hal Rosser wrote:
I think the main problem you'll have is feeding the coax through PVC -
you'll likely get lots of rf onto the braid.
think about feeding through some metal pipe - to protect the coax from
induced rf

As I understand it, he is feeding the coax through the center of
the bottom helical coil. What's going to protect the coil from
the metal pipe? :-)
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----