Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Richard I need more explanation than that because power is somewhat
irrelevant. Radiation in my mind (and I must be now worst off than I really thougt) is accelleration and decelleration of current which is certainly not power which in my mind is Isquared R. Thus if voltage is increased current decreases and therefore radiation decreases.( see effects of very close coupling of a parallel circuit) I really do not know where you are coming from, it seems so glib! This is not meant in a demeaning way, I just don't want to mix apples with oranges at this point in time. . Current through a member travels at a constant speed but with cyclic variations in radiation. Travel in a circle is also at constant speed but with a CONSTANT radiation per unit length. Where exactly is the error in my logic? I suspect it has to do with relative phase angles but I need it explained in every day language regards Art "Richard Clark" wrote in message news ![]() On Mon, 16 Aug 2004 20:31:03 GMT, " wrote: If I am incorrect I need to understand why Hi Art, Because "Extra" in the budget does not balance. If you get more power OUT because it is going in a circle, then you FIRST have to put more power IN to get into that same circle. There is no extra left. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Transmission line radiation | Antenna | |||
Cardiod radiation pattern - 70 cm phased vertical dipoles | Antenna | |||
Radiation Resistance & Efficiency | Antenna | |||
Incoming radiation angles | Antenna | |||
Measuring radiation resistance | Antenna |