Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
The best place is at the output of the transmitter or linear amplifier.
|
#3
|
|||
|
|||
On Sat, 18 Sep 2004 19:24:31 -0700, Tod Glenn
wrote: In article , (K9SQG) wrote: The best place is at the output of the transmitter or linear amplifier. Thanks all who answered. Tod When I've used a low-pass filter, I've simply attached it to the output of the transceiver with a double male coax connector, so the unwanted higher harmonics go directly into the filter, and then the hopefully clean signal moves on to the antenna feedline. bob k5qwg |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
How to connect external antenna to GE Super Radio III | Antenna |