| Home |
| Search |
| Today's Posts |
|
#9
|
|||
|
|||
|
"JohnN3TWN" wrote in message ... Please allow me to apologize in advance, but I can't resist asking: "If a dipole falls in a forest and there's no one there to hear it, does it make a sound?" Yes, the sound of its owner swearing up a blue storm at having to get the *&%$ thing back up over "just the right tree branches".... Been using a "random" dipole (actually configured in an inverted vee with 50 foot legs) made from insulated house wire, fed with 450 ohm line, hooked to a little MFJ tuner. QTH is DEEP in the woods and the antenna is VERY close to trees and actually passes within inches of many leaves/branches. Work mostly 40 CW but every so often will wander around from 80 to 10 CW and SSB. Sure, I'll never have a "big gun" signal with this antenna, but it works, its cheap and easy, and I can always find someone to chat with. Once and a while, I even manage to snag some pretty fair DX. The only thing I try to avoid is letting the antenna actually touch any thing. Good luck and good DX de N3TWN John John After re-reading your post I must agree. Wire antennas are cheap and easy. Significant improvements over wire antennas are expensive and difficult. 73 H., NQ5H |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| FS: Larsen KD150HW 2 meter half wave for handheld | Antenna | |||
| vertical dipole? | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||