Home |
Search |
Today's Posts |
#15
![]() |
|||
|
|||
![]()
Richard Harrison wrote:
Tom Donaly, KA6RUH wrote: "Richard, there is no such thing as a "current drop." This is where i came in almost a year ago. Yuri may havr posted Fig 9-22 from page 9-15 of the 1994 edition of ON4UN`s "Low-Band DXing". There are base loading, center loading, and continuous loading examples of short vertical antennas, and their current distributions. In every case, the currents at the two ends of the coil are different. The impedance of an antenna is a function of position along the antenna. There is radiation from an antenna so not only is the impedance along an antenna a variable, but the the transmit power level power level along an antenna is a variable, too. These variables ensure a difference between the current into and out of a loading coil. Current is high where impedance is low, and current is high where power is high. Best regards, Richard Harrison, KB5WZI Let me repeat, for those who might be tempted to use the term "current drop" in their casual conversation, there is no such thing as a "current drop." There can be variations in current in transmission lines, antennas, etc., but those are not "current drops." I'm surprised at you and Yuri, Richard. You two will have the CBers laughing at us. 73, Tom Donaly, KA6RUH |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Stainless steel antenna wire | Antenna | |||
EZNEC v. 4.0 at Dayton | Antenna | |||
Adding lengths to bare wire antenna? | Antenna | |||
3 antennas modeled with EZNEC | Antenna | |||
randon wire newbie question | Antenna |