| Home |
| Search |
| Today's Posts |
|
#8
October 6th 04, 12:51 AM
|
|||
|
|||
Thanks for the input , everyone. Pete N1AGV
Crazy George wrote: This is strictly a guess, but I tried the Hustler on 75 meters when it first came out back in the 50s. I quickly developed the impression that the principal impedance matching device was the lossy coil. VSWR was good, signal reports were lousy. Needless to say, I went back to a bugcatcher and a base matching coil. -- Crazy George Remove N O and S P A M imbedded in return address "pete365" wrote in message ... I didn't think that the wip would go that far down. I guess what I'm asking , is it normal for the coil to get hot when I go key down for a couple of minutes. Has anyone had one of these apart? what kind of coil is it? Pete N1AGV 'Doc wrote: Pete, By any chance was the whip/upper portion of the antenna extended down into the coil? As in a 'core' in the coil which shouldn't be there, that sort of thing? 'Doc |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| Mobile Ant L match ? | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Mobile Antenna Question | Antenna | |||
Threaded Mode
