| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
On Wed, 03 Nov 2004 10:04:53 GMT, Jerry wrote:
1. Should I get a 4-way coax splitter with each output at 7dB and terminate the unused output? This would leave an output free for future expansion in Room 4. I saw such a splitter at Radio Shack. Is there a better brand? Hi Jerry, Sounds fine. Better brand? Probably not (in other words, same chinese product with a different label). 2. Should I terminate the cable in the unused Room 1? Only if your picture appears to be fuzzy or distorted; however, it is a simple matter to perform and doing it tends toward a better solution. If you do, you should also terminate the unused splitter output too. 73's Richard Clark, KB7QHC |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stupid question G5RV | Antenna | |||
| 2-way splitter | Antenna | |||
| Seperation question???? thanks | Antenna | |||
| Yagi / Beam antenna theory question... | Antenna | |||
| Question about attenuators ... | Antenna | |||