Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Roy Lewallen wrote:
Hm, that's interesting. Was the tuner case floating? Did you try putting both baluns at the input or both at the output for comparison? And how much did the field strength improve and how did you measure it? The tuner case was tied to a ground rod at the base of the antenna support. In the last version, the radials were up at 20 ft. I didn't try it without a choke on the input but adding a choke to the output improved the ground level field strength at ~200 yards by a little over one dB on 40m, if memory serves me right. I can't locate my notebook at the moment. The field strength was measured using a Palomar FS-1 and ferrite rod pickup antenna. The choke on the output appeared to slightly reduce the received noise which is the problem I was chasing at the time. I never could get the received noise down to an acceptable level compared to my horizontal dipole so the vertical is gone. -- 73, Cecil http://www.qsl.net/w5dxp -----------== Posted via Newsfeed.Com - Uncensored Usenet News ==---------- http://www.newsfeed.com The #1 Newsgroup Service in the World! -----= Over 100,000 Newsgroups - Unlimited Fast Downloads - 19 Servers =----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |