"Pat MacKinnon" wrote in message
...
Okay, here's the situation:


All feed lines will be 9913 and 9914 except for the 23cm feed which will
be
7/8" hardline.

Make sure the 9913 (I don't know about 9914) is run so that if water gets in
at the antenna end, it will drain back out the same way. Once 9913 gets
water in one end, it WILL act like a hose, since it is semi hollow on the
inside. The 9913 FLEX is OK.

Tam/WB2TT

9913 acting as a hose!
Good point, I'll make sure all feeds go up a few inches before looping down.

EXCELLENT SUGGESTION!

Thanks!

PS:9914 is just like 9913 except the dielectric is solid foam, no teflon/air
helix, therefore more water resistant.


Pat
--
Reply address is:

papa mike kilo (figures: too zeero zeero three)
AT
foxhollow
ca

Sorry for the munging folks, but there it is.

Pat