LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Old February 16th 05, 05:38 AM
Cecil Moore
 
Posts: n/a
Default

Dan Jacobson wrote:
Yes! Say, can one just cut the reflector 5% longer than the antenna?
The antenna is some complex double 5/8 wavelength job.
If the reflector is shorter than the antenna, it becomes a director?


Nope, the reflector needs to be 5% longer than 1/2WL.
A 5/8WL antenna is NOT resonant. Passive elements must
be close to and referenced to resonance.

I had a vertical loop resonant on 17m. I installed a
reflector 1.05 x (1/2WL of 20m). It became a beam on 20m.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GRAYLAND 2004 FALL DXPEDITION: Compiled Logs for Oct 15-17 (Part 1) 4nradio Shortwave 4 November 1st 04 10:44 PM
That pesky 7238 kHz CW signal John Walton Homebrew 14 September 19th 04 02:16 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM
signal to noise ratio drops on connecting the antenna Ashhar Farhan Homebrew 0 September 18th 03 04:51 PM


All times are GMT +1. The time now is 04:14 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017