Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Yuri Blanarovich wrote:
If the feedpoint current was at 0 deg of the radiator length, and coil replaces 18 deg of wire, the cos 18 deg = 0.951 which should make difference, drop in the coil current 5% (or half, 2.5 deg?) Providing current maximum is exactly at the bottom end of the coil. It wasn't. The coil made the antenna too long so the current maximum was inside the coil. But this points up a measurement problem. I doubt that these measurements are 5% accurate. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Smith Chart Quiz | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Eznec modeling loading coils? | Antenna |