Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 5th 05, 01:20 AM
Hal Rosser
 
Posts: n/a
Default


"denton" wrote in message
...
Hi all......
I have a ground mounted 40 ft vertical wth an extensive buried radial

system
that I have been using with good success on 40 thru 10 meters and have

been
feeding it with 50 ohm coax to a 4 to 1 voltage balun at the base of the
antenna.
I recently tried feeding the antenna with 450 ohm twin lead and a Johnson
Matchbox with the twin lead parallel to the ground at about 6 inches
elevation.
I am pretty gratified to find the Matchbox will do a fine job of balancing
and matching on 80 thru 10 meters.

Anyone else try this?

I haven't tried feeding an unbalanced antenna with balanced line before,
unless there is a balun at the feedpoint of the antenna...have always
thought balanced line will only feed a balanced antenna....the exception
being an end fed zepp, or a 30 ft vertical with one 30 ft counterpose.


..
I've used twin lead to feed a vertical, but I used a balun on each end of
the twin lead to convert it to 50-ish ohms or so for both ends. It saved a
ton of money because it was a long run.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
FS: sma-to-bnc custom fit rubber covered antenna adapter Stephen G. Gulyas Antenna 20 December 8th 04 05:35 AM
FS: sma-to-bnc custom fit rubber covered antenna adapter Stephen G. Gulyas Equipment 51 December 7th 04 06:42 PM
FS: sma-to-bnc custom fit rubber covered antenna adapter Stephen G. Gulyas Swap 17 December 7th 04 06:42 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 07:42 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017