| Home |
| Search |
| Today's Posts |
|
#18
April 20th 05, 04:15 PM
|
|||
|
|||
28.4 Mhz of course!
John "John Smith" wrote in message ... I am going out today and see if I can't fit this all on a boom six foot long or less, drop that 1/4 wave phase reversal line, replace it with a 1:1 phase reversal balun and see just how close I can jam two phase reversed driven elements together... I need a tan anyway... grin Regards, John "Cecil Moore" wrote in message ... John Smith wrote: What would happen if you isolated that second driven element from the boom (the one you are effecting the phase-shift in, and added another reflector ( naturally it is in proper phase) behind it? Could you get the best of two worlds? The advantage of the phase-shift plus a FB ratio? You can get all the FB you want using two driven elements and Roy's simpfeed software. -- 73, Cecil, W5DXP ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Who are the FISTS members on RRAP? | Policy | |||
| Simple practical designing with antenna modeling programs | Antenna | |||
| Scaling yagi antennas | Antenna | |||
| ATTN: Tech Licensee USA Morse Code Freedom Day is August 1st | CB | |||
| Tech+ to General upgrade question | Policy | |||
Threaded Mode
