Methods for ladder line feed on rotatable antenna?

November 2nd 03, 04:11 AM

Reg Edwards

Posts: n/a

How would
one stiffen the overall draped loop though to prevent it being blown
near metal in a breeze?

========================

What's the matter with metal, steel, aluminium ?

Are they not good, low-loss conductors?

No harm in running, if you must, balanced lines near to metal structures for
a few inches.

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inverted ground plane antenna: compared with normal GP and low dipole.	Serge Stroobandt, ON4BAA	Antenna	8	February 24th 11 10:22 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna	Serge Stroobandt, ON4BAA	Antenna	12	October 16th 03 07:44 PM
70 ohm dipole to 50 ohm feed line question	Tom Sedlack	Antenna	10	October 6th 03 01:24 AM
50 Ohms "Real Resistive" impedance a Misnomer?	Dr. Slick	Antenna	255	July 29th 03 11:24 PM

All times are GMT +1. The time now is 02:40 PM.

Menu

About Us