Home |
Search |
Today's Posts |
#2
|
|||
|
|||
On Tue, 3 May 2005 18:41:17 +0200, ".J.S..."
wrote: Building something a bit like this : http://www.hamuniverse.com/multidipole.html He suggests setting up one wire at a time starting with the longest, is that the easy way ? I would think adding all wires, a bit too long , and then starting the adjustment with the shortest would be better ? All the other wires overlap the shortest 100%, so I would imagine later trimming of longer wires i parallell would not affect the short wire much. You are placing far too much importance on your objective of having each dipole resonant. It matters oh so very little from any point of view. Bob, W9DMK, Dahlgren, VA Replace "nobody" with my callsign for e-mail http://www.qsl.net/w9dmk http://zaffora/f2o.org/W9DMK/W9dmk.html |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RS DX-392 BFO centering adjustment? | Shortwave | |||
Plate Adjustment and Antenna Adjustment on old Tube CB | Boatanchors | |||
Azden PCS-6000 VCO Adjustment | Equipment | |||
Azden PCS-6000 VCO Adjustment | Equipment | |||
Sat 800 low batt indicator: Adjustment? | Shortwave |