Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
On Wed, 4 May 2005 13:40:47 -0700, "John Smith"
wrote: I claim Alzheirmers!!! OK, here is the link: http://blake.prohosting.com/mailguy2/JS-Rev2.jpg Hi Brett, Another Watt soaker (you better use 5W 50 Ohm resistors if you don't want blisters or burnt LEDs) - that is, if the caps (basically useless) don't turn off the LEDs. You will need to pour the power to a matched load to light them up (very poor low end sensitivity from pretty feeble LEDs). You could as easily throw away all the resistors and caps (and the so-called constant current source), or at least replace the resistors to 1/10 value straight to ground. I thought you wanted cheap? 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: MFJ 941D Antenna Tuner + MFJ 204B Antenna Bridge + MFJ 202B Noise Bridge | Shortwave | |||
FS: MFJ 941D Antenna Tuner + MFJ 204B Antenna Bridge + MFJ 202B Noise Bridge | Swap | |||
Bridge Megger Tester. Series 2. 500 Volt. | Boatanchors | |||
FS: E.F. Johnson Phone Patch and SWR Bridge, Gonset CPO | Equipment | |||
FS Tennatest RF Noise Bridge 1-150 MHz | Swap |