Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
On Thu, 12 May 2005 22:28:26 -0700, DaveC wrote:
DirectTV 20" dish, offset fed, f/d~0.7, to be used for 2.4 GHz wlan link. Offset feed dishes have different f/D ratios depending on polarization. I just did a quicky measurement of an RCA (Thomson) dish which yields 0.67. Close enough. http://www.qsl.net/n1bwt/app-5a.pdf As I understand the issues, the best feed is one that -- for a given focal length -- will "light" the dish with as spherical a wave as possible, that has a broad enough dispersion angle to fully "paint" the dish without picking up off-the-edge noise. Exactly. See: http://www.qsl.net/n1bwt/contents.htm for how it works. Be sure to read chaper 6 on feeds. I've looked at all types of feeds, from cantennas to bi-quads to patch to dual-dipole. All have their pros and cons. Biquad should work. http://www.trevormarshall.com/biquad.htm http://martybugs.net/wireless/biquad/ -3dB beamwidth of the biquad is about 60 degrees. Using a protractor to eyeball my pizza dish, it wants a 70 degree angle. Close enough. I'd like to hear from anyone who has done this before about what feed they chose and why. See: http://www.weijand.nl/wifi/ Have fun aiming the dish. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 AE6KS 831-336-2558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Source tracking with dish antennas | Antenna | |||
Parabolic dish gives weak performance increase | Antenna | |||
Horizintal loop with two feed points? | Antenna | |||
70 ohm dipole to 50 ohm feed line question | Antenna | |||
FS:RCA 18" Sat Dish w/ single LNB | Swap |