Hmmm... Could you explain why I need two pieces? Why can't I just
have one 3 foot piece of wire?

Thanks for your help. I really appreciate it.

Cecil Moore wrote in message ...
mfc wrote:
Could someone tell me how to make a single-wire antenna that can pick
up TV channel 5? I just need to know what length is best and what
material to use.

VHF Channel 5 is centered around 79 MHz. So two 3 foot pieces of
aluminum tubing connected in the center to a piece of 75 ohm coax
should do the job.

Be gentle...

"mfc" wrote in message
om...
Hmmm... Could you explain why I need two pieces? Why can't I just
have one 3 foot piece of wire?

Thanks for your help. I really appreciate it.

Cecil Moore wrote in message
...
mfc wrote:
Could someone tell me how to make a single-wire antenna that can pick
up TV channel 5? I just need to know what length is best and what
material to use.

VHF Channel 5 is centered around 79 MHz. So two 3 foot pieces of
aluminum tubing connected in the center to a piece of 75 ohm coax
should do the job.

Richard Fry wrote:
Be gentle...

:-) I am accepting of ignorance, Richard. In a lot of fields and ways, I
am extremely ignorant. What I find hard to accept is someone's alleged
wisdom when they are obviously ignorant. That includes most holier-than-
thou religious people who are somehow magically privy to the ultimate in
wisdom.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Could you explain why I need two pieces? Why can't I just
have one 3 foot piece of wire?

Two pieces will work better than one piece. One piece will work, just not as
well. The explanation of why one doesn't work as well as two is complex. As
others have stated, one piece of wire will work, and the length or orentiation
may not be critical.
73 Gary N4AST

JGBOYLES wrote:

Could you explain why I need two pieces? Why can't I just
have one 3 foot piece of wire?

Two pieces will work better than one piece. One piece will work, just not as
well. The explanation of why one doesn't work as well as two is complex. As
others have stated, one piece of wire will work, and the length or orentiation
may not be critical.
73 Gary N4AST

The 'two piece' job can be a set of rabbit ears. One advantage is that
it will be directional and may help if you have a ghosting problem. If
the signal is sufficient, sometimes just a hunk of wire hanging off the
back of the set will be enough.
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/
Visit my very special website at http://members.shaw.ca/finkirv4/
Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada

I had an old Hoffman TV in Calif back in 1959. The antenna I had was a 20-inch
length of hookup wire.

Pulled in lots of channels. When there was a ghost, I just moved the wire
until it went away.

Jack K9CUN

mfc wrote:
Hmmm... Could you explain why I need two pieces? Why can't I just
have one 3 foot piece of wire?

Basically, the center of the six foot section has an impedance that
closely matches the impedance of the 75 ohm coax. It's called a
center-fed dipole (two poles broken in the center). Or you could
use rabbit ears which are also broken in the center.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----