Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #211   Report Post  
Old August 14th 05, 01:44 AM
Richard Clark
 
Posts: n/a
Default

On Sat, 13 Aug 2005 16:57:52 -0500, Cecil Moore
wrote:
some people use that exact same argument to try to prove
that no current is flowing in the middle of a transmission line

Or uncanceled reflections brighter than the sun are black.
  #212   Report Post  
Old August 14th 05, 04:34 AM
Cecil Moore
 
Posts: n/a
Default

Richard Clark wrote:
Cecil Moore wrote:
some people use that exact same argument to try to prove
that no current is flowing in the middle of a transmission line


Or uncanceled reflections brighter than the sun are black.


In a lossless system sourced by monochromatic
coherent light, if the 1st medium is air and if the
index of refraction of the 3rd medium is the square of
the index of refraction of the 1/4WL 2nd medium, then
all reflections are canceled in the 1st medium. That's
one of the rules of optics for non-reflective coatings.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #213   Report Post  
Old August 14th 05, 04:51 AM
Cecil Moore
 
Posts: n/a
Default

Richard Harrison wrote:

Cecil, W5DXP wrote:
"Net current doesn`t flow."

How much current flows into 400.000 ohms?


Let's take a look at a simplified system. The SGCL source is
a signal generator equipped with a circulator and load resistor.
Each segment in the following 50 ohm lossless coax is 1/4WL long.

|--------1.25WL 50 ohm coax-------|
200W SGCL------A------B------C------D------short

The signal generator is sourcing 200W and the circulator load
resistor is dissipating 200W.

What is the net current at the short and at A and C?

What is the net voltage at D, B, and the source?

What is the forward power and reflected power?

What is the net current at the signal generator output?

What magnitude of current is the signal generator sourcing?

What magnitude of current is flowing through the circulator
load resistor?

What is the phase difference between the forward current and
reflected current?
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
  #214   Report Post  
Old August 14th 05, 06:01 AM
Richard Clark
 
Posts: n/a
Default

On Sat, 13 Aug 2005 22:34:38 -0500, Cecil Moore
wrote:
then all reflections are canceled in the 1st medium

"all," of course, if you discard precision to force the theory to fit
the expectations.
About as respectable as E = M · C² ±3dB
  #215   Report Post  
Old August 14th 05, 01:23 PM
Cecil Moore
 
Posts: n/a
Default

Richard Clark wrote:
Cecil Moore wrote:
then all reflections are canceled in the 1st medium


"all," of course, if you discard precision to force the theory to fit
the expectations.
About as respectable as E = M · C² ±3dB


Given an ideal system with carefully selected boundary conditions,
all reflections are canceled. That is a concept, not something
that can be achieved in reality. Your height and weight on your
driver's license is not 100% accurate either but it is good
enough for government work.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---


  #216   Report Post  
Old August 14th 05, 03:54 PM
Richard Clark
 
Posts: n/a
Default

On Sun, 14 Aug 2005 07:23:56 -0500, Cecil Moore
wrote:
Your height and weight

±3dB? All the expectation of a Dr. Atkins diet.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Failure of Poor Concepts in Discussing Glare Reduction Richard Clark Antenna 17 July 27th 05 12:26 PM
Have you had an FT-817 finals failure? Carl R. Stevenson Equipment 4 October 10th 03 01:57 PM
Have you had an FT-817 finals failure? Carl R. Stevenson Equipment 0 October 9th 03 03:42 AM


All times are GMT +1. The time now is 08:28 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017