LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10   Report Post  
Old August 7th 05, 08:03 PM
Richard Clark
 
Posts: n/a
Default

On Sun, 7 Aug 2005 20:18:58 +0200, Mark Veldhuis
wrote:

The noise/buzz on this clip is stronger than on the previous one.

Thanks in advance!

http://www.mark-veldhuis.nl/audio.mp3


Hi Mark,

This is more distinctive, and I have heard this before. I do not
think it is local noise, sounds more like jamming. In fact, it may
not be on the frequency you think it is, but rather is an IF image.

Try tuning around 910KHz higher (or lower) in frequency to see if you
can hear the same thing. (910KHz will only work if your receiver has
an IF of 455KHz)

73's
Richard Clark, KB7QHC


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Shortwave 23 November 3rd 04 01:38 PM
VT Communications B'04 Mike Terry Shortwave 1 October 12th 04 07:14 PM
FS: Wellbrook ALA 1530P Loop Victor Trucco Shortwave 0 January 25th 04 04:36 PM
FS: Wellbrook ALA 1530P Loop Victor Trucco Swap 0 January 25th 04 04:36 PM
Should I run a Sky-wire loop? Rick Frazier Dx 9 September 8th 03 08:57 AM


All times are GMT +1. The time now is 11:35 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017