Dan/W4NTI wrote:
I am putting up my old TA-33SR by Mosley. I need to know how many windings
are needed on the choke. I seem to remember 6" diameter, but not the
amount of windings.

According to the manual there is no choke indicated at all.

Anyone know anything about this?

Dan/W4NTI


My TA-33 manual calls for 5 turns at 6 inch diameter
Bill, W3FI

On Mon, 22 Aug 2005 21:18:30 -0400, BillJ wrote:

Dan/W4NTI wrote:
I am putting up my old TA-33SR by Mosley. I need to know how many windings
are needed on the choke. I seem to remember 6" diameter, but not the
amount of windings.

According to the manual there is no choke indicated at all.

Anyone know anything about this?

Dan/W4NTI


My TA-33 manual calls for 5 turns at 6 inch diameter
Bill, W3FI

That your TA-33 manual calls for a 5-turn 6" diameter balun fabbed
from coax is welcome news, Bill, Mr. Mosely must have gotten religion
lately. I had a 33 when they were first made available, but no balun
was included. So I had a talk with Mr. Mosely (I've forgotten his
first name) and asked him why no balun. He became irate when I
admonished him for excluding the balun. He said his antennas were
designed to not need a balun, and he admonished me for claiming they
needed a balun to avoid pattern distortion due to unwanted radiation
from the feedline. He kept that same erroneous viewpoint for as long
as I know, until your manual now calls for a balun. Will wonders never
cease!

Walt, W2DU

Mr. Moseley's first name was Carl. He was known on the air as "the Old Man
Himself." I worked him on 40 cw when I was a novice in 1967. He has probably been
a silent key for 30 years or longer. I don't remember his call but I have his card
in my card file. K4AVO

Walter Maxwell wrote:

On Mon, 22 Aug 2005 21:18:30 -0400, BillJ wrote:

Dan/W4NTI wrote:
I am putting up my old TA-33SR by Mosley. I need to know how many windings
are needed on the choke. I seem to remember 6" diameter, but not the
amount of windings.

According to the manual there is no choke indicated at all.

Anyone know anything about this?

Dan/W4NTI


My TA-33 manual calls for 5 turns at 6 inch diameter
Bill, W3FI

That your TA-33 manual calls for a 5-turn 6" diameter balun fabbed
from coax is welcome news, Bill, Mr. Mosely must have gotten religion
lately. I had a 33 when they were first made available, but no balun
was included. So I had a talk with Mr. Mosely (I've forgotten his
first name) and asked him why no balun. He became irate when I
admonished him for excluding the balun. He said his antennas were
designed to not need a balun, and he admonished me for claiming they
needed a balun to avoid pattern distortion due to unwanted radiation
from the feedline. He kept that same erroneous viewpoint for as long
as I know, until your manual now calls for a balun. Will wonders never
cease!

Walt, W2DU

On Mon, 22 Aug 2005 22:55:26 -0400, Pat Cox
wrote:

Mr. Moseley's first name was Carl. He was known on the air as "the Old Man
Himself." I worked him on 40 cw when I was a novice in 1967. He has probably been
a silent key for 30 years or longer. I don't remember his call but I have his card
in my card file. K4AVO

Yes, Pat, the name Carl came to me only a few minutes after I posted,
you know, the Alzheimers syndrome.

Walt, W2DU

My TA-33 manual calls for 5 turns at 6 inch diameter
Bill, W3FI

That your TA-33 manual calls for a 5-turn 6" diameter balun fabbed
from coax is welcome news, Bill, Mr. Mosely must have gotten religion
lately. I had a 33 when they were first made available, but no balun
was included. So I had a talk with Mr. Mosely (I've forgotten his
first name) and asked him why no balun. He became irate when I
admonished him for excluding the balun. He said his antennas were
designed to not need a balun, and he admonished me for claiming they
needed a balun to avoid pattern distortion due to unwanted radiation
from the feedline. He kept that same erroneous viewpoint for as long
as I know, until your manual now calls for a balun. Will wonders never
cease!

Walt, W2DU

I recall helping put up a beam for the Denver Radio Club station in
about 1972 or 3, and one of the instructions was to wind the coax into a
choke at the feedpoint. At the time I didn't understand quite why or
what it did, but it was there in the instructions. Don't recall what
kind of beam it was, but considering the popularity of the TA33, it
might well have been that model.

Roy Lewallen, W7EL

Walter Maxwell wrote:

That your TA-33 manual calls for a 5-turn 6" diameter balun fabbed
from coax is welcome news, Bill, Mr. Mosely must have gotten religion
lately. I had a 33 when they were first made available, but no balun
was included. So I had a talk with Mr. Mosely (I've forgotten his
first name) and asked him why no balun. He became irate when I
admonished him for excluding the balun. He said his antennas were
designed to not need a balun, and he admonished me for claiming they
needed a balun to avoid pattern distortion due to unwanted radiation
from the feedline. He kept that same erroneous viewpoint for as long
as I know, until your manual now calls for a balun. Will wonders never
cease!

Walt, W2DU

That sounds like what my CRS gray matter was trying to remember....thanks.

Dan/W4NTI

"BillJ" wrote in message
...
Dan/W4NTI wrote:
I am putting up my old TA-33SR by Mosley. I need to know how many
windings are needed on the choke. I seem to remember 6" diameter, but
not the amount of windings.

According to the manual there is no choke indicated at all.

Anyone know anything about this?

Dan/W4NTI


My TA-33 manual calls for 5 turns at 6 inch diameter
Bill, W3FI