| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
On Thu, 8 Sep 2005 19:51:11 -0400, "Frank" wrote:
What is the best type of "wire" for making a homemade car antenna to pick up FM radio. Is it copper? Aluminium? What thickness or size. Lenght? Hi Frank, Try welding rod. 73's Richard Clark, KB7QHC |
|
#2
|
|||
|
|||
|
Or "Brazeing Rod" might be more acceptable, as most welding rod have
seen is coated with flux -- Jim NN7K Richard Clark wrote: On Thu, 8 Sep 2005 19:51:11 -0400, "Frank" wrote: What is the best type of "wire" for making a homemade car antenna to pick up FM radio. Is it copper? Aluminium? What thickness or size. Lenght? Hi Frank, Try welding rod. 73's Richard Clark, KB7QHC |
|
#3
|
|||
|
|||
|
"Jim - NN7K" wrote in message
... Or "Brazeing Rod" might be more acceptable, as most welding rod have seen is coated with flux -- Jim NN7K Richard Clark wrote: On Thu, 8 Sep 2005 19:51:11 -0400, "Frank" wrote: What is the best type of "wire" for making a homemade car antenna to pick up FM radio. Is it copper? Aluminium? What thickness or size. Lenght? Hi Frank, Try welding rod. 73's Richard Clark, KB7QHC Arc welding rods are usually coated. Gas welding rods are not, and could be brass, steel etc. |
|
#4
|
|||
|
|||
|
"Frank" wrote:
What is the best type of "wire" for making a homemade car antenna to pick up FM radio. Is it copper? Aluminium? Traditional is steel (i.e. coat-hanger wire :-) In reality, it makes no difference except mechanically. What thickness or size. It is a mechanical issue. What makes it self-supporting? Electrically it is of no significance. Lenght? Well, the middle of the FM broadcast band is ~98MHz and 1/4 wavelength is ~28.5 inches. http://www.csgnetwork.com/antennagen...eqlencalc.html |
|
#5
|
|||
|
|||
|
Richard Crowley wrote:
"Frank" wrote: What is the best type of "wire" for making a homemade car antenna to pick up FM radio. Is it copper? Aluminium? Traditional is steel (i.e. coat-hanger wire :-) In reality, it makes no difference except mechanically. What thickness or size. It is a mechanical issue. What makes it self-supporting? Electrically it is of no significance. Lenght? Well, the middle of the FM broadcast band is ~98MHz and 1/4 wavelength is ~28.5 inches. http://www.csgnetwork.com/antennagen...eqlencalc.html The average car antenna is 31" in length. Ed |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Building an antenna | Shortwave | |||
| Antenna Advice | Shortwave | |||
| Newbie SWL question: Antenna geometry | Shortwave | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Balun | Shortwave | |||