LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #16   Report Post  
Old September 27th 05, 04:52 AM
Owen Duffy
 
Posts: n/a
Default

On Tue, 27 Sep 2005 02:54:31 +0000 (UTC),
wrote:

Owen Duffy wrote:
On Tue, 27 Sep 2005 02:25:11 +0000 (UTC),

wrote:



SWR is nothing more than a dimensionless impedance ratio.


The fundamental definition of SWR flows from the behaviour and
properties of RF transmission lines.

When a transmission line is terminated in an impedance other than its
characteristic impedance, there will be both a forward wave and a
reflected wave of such magnitude to resolve the conditions that must
apply at the termination.

The forward wave and the reflected wave sum at all points along the
line having regard for their magnitudes and relative phase to produce
a "standing wave". The Standing Wave Ratio (SWR or VSWR) is defined to
mean the ratio of the maximum to the minimum of the magnitude of the
standing wave voltage pattern along the line.

The SWR on a lossless line can be calculated knowing the complex
characteristic impedance of the line and the complex load impedance.

The SWR on the line does not depend in any way on some unrelated
independent reference resistance as you suggest in your formula.

You seem to be suggesting that your redefined SWR is a really good
(obscure) way to talk about an impedance (independently of a
transmission line) in terms of some standardised reference value, and
you can throw away the fundamental meaning of SWR to support your
SWR(50) concept. In your terms (independently of a transmission line),
for instance, a Z of 60+j10 would be SWR(50)=1.299, and so would an
infinite number of other Zs have SWR(50)=1.299... how is that of
value. To know Z is 60+j10 is to know more than to know SWR(50)=1.299.

Owen
--
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: UHF Duplexers and Cavity [email protected] Swap 0 August 23rd 05 12:28 AM
FS: Icom RP-2210 repeater with 4 cavity duplexer Tim Walker Equipment 0 August 22nd 04 06:39 PM
help identify: Varian VMC-1680 (5.5 GHz oscillator; Magnetron? Klystron?) peter dingemans Homebrew 5 June 24th 04 04:32 AM
FS: cavity for 829 tubes Scott Dorsey Boatanchors 0 February 27th 04 12:55 AM
Fuel Tanks and Cereal Silos as Cavity Resonators for HF SpamLover Homebrew 10 October 8th 03 08:13 PM


All times are GMT +1. The time now is 05:54 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017