Home |
Search |
Today's Posts |
#1
|
|||
|
|||
help with EZNEC and a parasitic vertical antenna
Hello All,
I looked through the past threads about an antenna article that has appeared twice in QST. The last article appeared in 1995 and was authored by Robert Wilson, AL7KK. I'm thinking of building this type of antenna, but wanted to change the element diameter from 1" to 1/2". I tried to use EZNEC, but I'm having trouble setting the parameters for the antenna correctly. Could one of the folks out there with more knowledge of the program than I help me see what the change in diameter will do to the antenna characteristics? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
EZNEC model of sleeve antenna | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |