how to check balun - RadioBanter

November 7th 05, 10:51 PM

Steve Nosko

Posts: n/a

how to check balun

Roy forgot to mention / stress that a balun is designed for specific
impedances. If it is a common 1:1 balun, then it is probably designed for
50 ohms. They are designed for feeding a 1/2 wave dipole or similar
antenna, not widely different (from 50) impedances.

Steve, K,9.D;C'I

"RB" wrote in message
...
Wow! Good info, Roy. Thanks. That should get me going, at least.

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to measure soil constants at HF	Reg Edwards	Antenna	104	June 25th 05 10:46 PM
Balun type?	JB	Equipment	0	May 9th 05 02:19 AM
Balun on various bands	Frank MacKenzie-Lamb	Antenna	4	January 29th 04 12:16 AM
Horizontal loop - balun or no balun ?	Per Enocson	Antenna	5	December 14th 03 01:28 AM
Check my math please?	yea right	Antenna	2	October 25th 03 08:29 PM

All times are GMT +1. The time now is 02:21 AM.

Menu

About Us