Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
andy wrote:
Here is the situation: have an inverted V for 80m and noise level is S9.. Not good really.... Any advice is welcome. Right now I cant even figure if that roof is acting like a shield or a big noise-sucking antenna.. If you can somehow get your inverted-V to a horizontal position for testing, you might be plesantly surprised. At my QTH, going from an inverted-V to a horizontal dipole at the same center height lowered my noise level by 2 S-units on 40m. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
'Crackling' Noise on HF Band | Shortwave | |||
Icom 746pro Testimonial | Shortwave | |||
signal to noise ratio drops on connecting the antenna | Homebrew | |||
Automatic RF noise cancellation and audio noise measurement | Homebrew | |||
CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE | Shortwave |