Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
It's a W2AU Balun that came with the antenna. I took a pulley and attached
it to the tower and then took a line and attached it to the Balun so i could raze and lower it for adjustments. So the Balun is about a foot away from the tower. It seems to tune ok all readings are below 2.1 on center freq on phone bands on 40 80 160. Just wonder if it's hearting the transmitting. Thanks for the input.. Steve "Cecil Moore" wrote in message news ![]() Steve wrote: Still no input on my question. The feed point at the balun. should it be off the tower on a stand off or is it ok to just hang it off a leg of the tower. Is the balun mounted in an aluminum enclosure? If so, it's probably OK to fasten it to the tower assuming the tower is not RF 'hot'. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Discone antenna plans | Antenna | |||
Yaesu FT-857D questions | Equipment | |||
LongWire Antenna | Shortwave | |||
EH Antenna Revisited | Antenna |