| Home |
| Search |
| Today's Posts |
|
#8
November 13th 05, 07:56 PM
|
|||
|
|||
coax for 900mhz?
Jim wrote:
thanks guys for your input! ok, forget about thin and supple. i need 50 ohm impedance coax at 900mhz into a uniden scanner(bnc connector) with a 15 foot run. what coax of any size is commonly available that would be suitable? LMR-1700 looks pretty good on the loss charts. It's about $10 per foot, 1.67 inch diameter - not sure about the BNC connector :-) -- 73, Cecil http://www.qsl.net/w5dxp |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| A Coax experiment | Shortwave | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
Threaded Mode
