Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 9th 05, 07:42 AM posted to rec.radio.amateur.antenna
Bob
 
Posts: n/a
Default G10 fiberglass rod needed

I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks


  #2   Report Post  
Old December 9th 05, 05:49 PM posted to rec.radio.amateur.antenna
John, N9JG
 
Posts: n/a
Default G10 fiberglass rod needed

Check out this place http://www.mgs4u.com/fiberglass-tube-rod.htm

"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks



  #3   Report Post  
Old December 10th 05, 12:50 PM posted to rec.radio.amateur.antenna
GS
 
Posts: n/a
Default G10 fiberglass rod needed

Hi Bob,

I can ge tubing in the size made of PUL500 which is an industrial grade of
Fiberglass, but 20ft must be purchased.

It is expensive. However if you are looking for 1" dia solid that could
arranged as I ourchase it on a regular basis.

73's
Guenther Schweigl
General Manager
Degen Designs
www.degendesigns.com


"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks



  #4   Report Post  
Old December 10th 05, 07:03 PM posted to rec.radio.amateur.antenna
Bob
 
Posts: n/a
Default G10 fiberglass rod needed

Thank you for your kind offer, I am not in a big hurry, so I will wait until
I can find some short pieces.
"GS" wrote in message
.. .
Hi Bob,

I can ge tubing in the size made of PUL500 which is an industrial grade of
Fiberglass, but 20ft must be purchased.

It is expensive. However if you are looking for 1" dia solid that could
arranged as I ourchase it on a regular basis.

73's
Guenther Schweigl
General Manager
Degen Designs
www.degendesigns.com


"Bob" none@thistime wrote in message
...
I need about three feet (can be three pieces) of G10 rod about 1 1/2 to 2
inches in diameter. Any suggestions as to a reasonably priced source?
Thanks





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
G10 fiberglass rod needed Bob Homebrew 3 December 9th 05 01:50 PM
Fiberglass G10 rod needed Bob Boatanchors 0 December 9th 05 07:42 AM
Tech Opinion Needed: Roof mounted AM/FM Auto Antenna [email protected] Shortwave 0 October 28th 05 10:06 PM
Need to buy sheets of fiberglass insulation wm2f Antenna 2 December 31st 04 02:57 AM
Motorola Info needed????? karl Swap 0 July 26th 03 07:29 PM


All times are GMT +1. The time now is 03:46 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017