Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Charlie wrote:
I would recommend you take a look at Davis RF "BuryFlex" 9914. It is very nearly the exact same loss per 100ft (within a couple tenths of a db) as LMR400 and/or 9913. It can be directly buried in the soil with no other provisions needed. It has an abrasion resistant non-contaminating jacket that has a warranted 20 year service life. It is also quite affordable at about $.60/ft. It is very flexible and indeed is fine even as rotator loops. I use it on all bands I run from HF thru 6M and 2M. It uses standard UHF or N connectors as well. Loss per 100ft at 400MHZ is 2.9db Check it out here.... 1. http://www.davisrf.com/ham1/coax.htm#buryflex I've got some of that which I purchased new, and did some extensive tests on it with a network analyzer. The loss varies all over the map depending on how you coil, bend, or flex the cable, and I never saw loss anywhere near as low as the spec says. A typical value at 400 MHz was more like 5 - 5.5 dB/100 ft. Glad you're happy with it. Roy Lewallen, W7EL |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
A Coax experiment | Shortwave | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |