Looking for fiberglass antenna part

December 14th 05, 08:37 PM posted to rec.radio.amateur.antenna

Posts: n/a

Looking for fiberglass antenna part

Short of having a machinist build me some, can anyone advise where I
might be able to buy this part for a home made antenna project....

I need an addapter that is 3/8" x 24 thread on one end, and a 1/2"
tube on the other... to fit over 1/2" fiberglass rod. I can use 3/8" to
5/8" rod diameters to meet this part specs, if necessary.

Stainless steel or brass would be fine.

Ed K7AAT

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inverted ground plane antenna: compared with normal GP and low dipole.	Serge Stroobandt, ON4BAA	Antenna	8	February 24th 11 11:22 PM
On Topic	[email protected]	Shortwave	5	November 2nd 05 11:35 AM
FS: sma-to-bnc custom fit rubber covered antenna adapter	Stephen G. Gulyas	Scanner	17	December 7th 04 07:42 PM
Outdoor Antenna and lack of intermod	Soliloquy	Scanner	11	October 11th 03 02:36 AM
Outdoor Scanner antenna and eventually a reference to SW reception	Soliloquy	Shortwave	2	September 29th 03 05:04 PM

All times are GMT +1. The time now is 04:31 PM.

Menu

About Us