Chuck S. wrote:

Clamp types have cause me problems over the years, stay away from them.
Crimp type work ok in the shack but not out side for a long time.

If you are going to crimp and use it outside you certainly need to use
some good adhesive lined shrink tube to seal it up. I'm curious why no
one seems to like crimp. Other than the cost of the tools to do it
right it seems like a much easier way to go. Crimping works great for
other types of connections. Also I did a lot of browsing on Times
Microwave's web site and about all they talk about are crimp and clamp
on connectors, for the big cables it is clamp only, I think part of the
reason for that is you would probably need a hydraulic crimping tool for
those big cables

Solder it
by far the best way to go. Another type that works good outside is
compression clamps. The ones meant to be used with hard line. They cost
more, but unless you like climbing up a 60 foot tower in a contest, they are worth the cost!



I like those, the only connectors I have put on so far is a solder/clamp
N and a solder UHF, the N was a solder on pin, which was pretty easy and
then the clamp on outer shell. The only hard part was getting the cable
striped cleanly but a good coax stripper should fix that. That is the
next thing I plan on buying, I just need to find a good one.

--
Chris W
KE5GIX

Gift Giving Made Easy
Get the gifts you want &
give the gifts they want
One stop wish list for any gift,
from anywhere, for any occasion!
http://thewishzone.com